Automatic Pipe Shrinking Machine 3KW , Stainless Steel Pipe Shrinking Machine

Place of Origin:

Jiangsu, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: G400

Automatic Pip

Automatic Pipe Shrinking Machine 3KW , Stainless Steel Pipe Shrinking Machine

G400 pipe-shrinking machine for making pipe before done in drawing machine

Quick Detail:

1. Type: pipe-shrinking machine

2. Model Number: G400

3. Used in: G400 pipe-shrinking machine is for making pipe before drawing machine,the material can be any metal.G400 pipe-shrinking machinecan roll pipe diameter of 12--25mm to 10--20mm.

The technical parameters:

Operating Instructions:

No.	Name	Technical Parameters	Unit
1	Range of Reduction for Diameter	12 ~ 25	mm
2	Diameter of Mother Tube	10 ~ 20	mm
3	Time for one reduction	4 ~ 6	s
4	Motor	3	kw
5	System pressure	17	Mpa
6	Machine Size	700550990	mm
7	Machine weight	500	kg

G400 pipe-shrinking machine operations and processes

1. Take out the mould by rotating it according to arrow direction, no reverse rotation allowed.

2. Moulds can be changed according to different specifications.

3. Head length can be adjusted by middle adjusting rod, loose the belt wheel screw, adjust the length and fasted the screw again.

4. Pour in 80% diesel and 20% engine oil, as the oil pump capacity is big, oil box entrance valve should be fully open, machine valve fix a little oil is ok.

5. After the umbrella-block wear down and the gap becomes big, you can put a gasket between umbrella block and the mould, but the gasket can not be too thick so that machine won't get stuck.

6. The lubrication oil should be changed after it gets dirty.

Safety Precautions

1,Place the machine on a fixed horizontal surface and the calibration level, the machine is stable.

2,Check the oil level b